Powercraft - Compressor & adapter question

Honest John Back Room » Technical matters
View Threaded
Sat 7 May 2011 23:28
Powercraft - Compressor & adapter question - Gregory II
I have posted the question on this forum.
www.lpgforum.co.uk/viewtopic.php?f=33&t=8137&p=629...2

I have an impact wrench, and I would like to know which adapter I should use with my compressor.

The impact wrench connector photo:
s1112.photobucket.com/albums/k489/gregray1/?action...g

The air gun connector:
s1112.photobucket.com/albums/k489/gregray1/?action...g

The hose attachment:
s1112.photobucket.com/albums/k489/gregray1/?action...g

Many, many thanks for your help in this matter.
Regards
Gregory
Reply | Report as offensive | Link
Sun 8 May 2011 08:19
Powercraft - Compressor & adapter question - piston power

The garage standard is PCL fittings sold at machine mart.

The thread to the air gun is 1/4 bsp.

Your fittings don't look like PCL on the air line it's difficult with your photo, But pop down to a tool company or online and change over to PCL and you can get these all over the uk.

The compressor ideally wants to be 100ltrs tank minimum to work a air gun but will work on a 25ltr to undo a stuck bolt but will rapidly deflate the tank supply.

Reply | Report as offensive | Link