Ford Mondeo III (2000 - 2007) - 2004 2.0TDCi - DMF Issue

Honest John Back Room » Technical matters
View Threaded
Wed 27 May 2009 19:38
2004 2.0TDCi - DMF Issue - jon-george
mt dmf has failed and i have been told that it is possable to fit a solid one but speaking to ford they say not has any one fitted one off these or should i just fit a new dmf and new clutch and not to forget a new release bearing

{corrected year from a previous post of yours found via a forum search}

Edited by Dynamic Dave on 27/05/2009 at 19:41

Reply | Report as offensive | Link
Wed 27 May 2009 19:58
2004 2.0TDCi - DMF Issue - AndyT
Apparently Euro Car Parts sell the solid flywheel conversion kits. Thay're also listed on ebay for between £350 - £380.
Reply | Report as offensive | Link
Wed 27 May 2009 20:16
2004 2.0TDCi - DMF Issue - paulontour
You can get a solid flywheel for the 5 speed gearbox only. If you have a 6 speed gearbox I am afraid you will have to replace with another DMF.
Reply | Report as offensive | Link
Wed 27 May 2009 20:51
2004 2.0TDCi - DMF Issue - jon-george
i do have a 6 speed box
Reply | Report as offensive | Link
Wed 27 May 2009 23:14
2004 2.0TDCi - DMF Issue - AndyT
Didn't you look at ebay then? Link- tinyurl.com/oxvood

Reply | Report as offensive | Link
Thu 28 May 2009 00:20
2004 2.0TDCi - DMF Issue - MikeTorque
Does anyone know if the solid flywheel causes/creates any noticable vibration/noise differences compared with a DMF ?
Reply | Report as offensive | Link
Thu 28 May 2009 17:50
2004 2.0TDCi - DMF Issue - ifithelps
Removed following a complaint about a very yesterday bit of ethnic stereotyping

Edited by Pugugly on 28/05/2009 at 18:44

Reply | Report as offensive | Link

From which small car to buy at which price point to the best UK-built cars, our Top 10s have the lot. Click now for your shortlist.

Unsure of what to buy? Our Top 10s are here to help you....