Peugeot 306 (1993 - 2001) - 99t 1.9 td where to find tool to open centre con

Honest John Back Room » Technical matters
View Threaded
Wed 4 Jun 2008 15:58
99t 1.9 td where to find tool to open centre con - bigkaz
hi people i'm after a tool that i can use to open the screws on the centre console the one that houses the tape air controls etc the screws seen to be star shaped i have tried using a philips screw driver but no luck alan key seems to grip it a little but not enough grip to loosen. Any suggestions welcome and thanks in advance to contributors.
Reply | Report as offensive | Link
Wed 4 Jun 2008 16:03
99t 1.9 td where to find tool to open centre con - Screwloose

Nip down to any tool shop and buy yourself a set of Torx screwdrivers.
Reply | Report as offensive | Link
Thu 5 Jun 2008 11:28
99t 1.9 td where to find tool to open centre con - johnreeves
If they are same screws as the lidded compartment in SEDAN then i use a small electrical screwdriver (the one with silver button on top) and it works fine. If you have a Screwfix or Wilkinsons they sell the torx screwdivers at very cheap prices.
Reply | Report as offensive | Link