|
Can anybody help traction control and abs warning lights have come on,I got the car hooked up to the vag box it produced fault code 01200 which turns out to be abs valve voltage supply - fuse S54.Now the problem is where is S54 can anybody save me from the stealers.The model is 2001 130pd.
|
There should be three fuses in total. Fuse 7 and 10 (Both 10 amp)
both whch are in the main fuse box in the car. (At the end of the righthand section of the dash) and a 50 amp fuse that will be behind another fuse box that is located UNDER the right hand lower corner of the dash. The fuse position in the fuse box varys from model to model, so I can not give you a number.
Check this fuse for signs of melting where it plugs into the fuse box. If all of these are fine, then it may be worth unplugging the ABS unit and looking for signs of corrosion/pin damage on the loom connector. Only do this with the ignition off.
I can give you the pin data for this connector plug if you want to check that the "earths" and "lives" are all present if you wish.
Regards Tony
|
|
Thanks Tony any details you can provide would be most welcome.I am taking the car to the local vw specialist this saturday he is going to have a look to see if he can find the offending part.Really dont want to have to go to the stealers .
|
No problem.
if the garage is a VW speciatist, then I am sure that they will have all the data that is required, and know of any "common problems" with theses cars. Please do post the result.
Regards Tony
|
|
Had the bottom fo the dash out this morning all the fuses seem to be ok also checked the abs plug clean as a whistle.So its the stealers on friday, we will see how good all the latest hardware is.
|
|
|
_COLON_no_upscale()/cdn.uk.prod.group-mobility-trader.com/images/cas/f84d150ef8af6ffd63b1283755b6588d/e974ec3953c5d0806a5bc10704e430fb.jpg)
