Hot topic
I have a Fiesta 1.25 V reg and the heaters will not turn off. I've changed the heater valve and flushed and renewed the coolant but this seems to have made things worse. Please help?
Asked on 10 May 2011 by Kelrich
Answered by
Alan Ross
Well it sounds as though the blend doors are stuck.These control the amount of air coming into the car.
You could try pressing the recirculating button a few times to see if that will release them.
Also make sure that all cabling running to the heater matrix is working ok.
Rather difficult to get to the blend doors (behind the dash/radio).
In the short term you could turn of the water supply to the heater matrix , however you wouldn't have any heat at all.
You could try pressing the recirculating button a few times to see if that will release them.
Also make sure that all cabling running to the heater matrix is working ok.
Rather difficult to get to the blend doors (behind the dash/radio).
In the short term you could turn of the water supply to the heater matrix , however you wouldn't have any heat at all.
Similar questions
I have a problem with the heater fan blower on my 2004 Vectra SRI. The blower only works on the high setting - 4. It does not work on 1 to 3. How do i locate the resister for this model.
Kia Sedona TS 2007/57 plate, Front heater blower not working, back works fine. Everthing looks good on dash but blower not blowing. Can hear low humming noise when turned on.
The temperature gauge oscillates between optimal and maximum on my 2001 Ford Mondeo 1.8 petrol. My heater doesn't work well either. Most of the time it blows cold air and occasionally gives a burst of...
Related models
.jpg?width=115&height=75&rmode=crop)
1995 Fiesta faclifted. Retained much improved handling and decent engines.
.jpg)
