Selling your classic car? It's FREE to list your car on Honest John Classics | No thanks
MGB - MGB (Modified) way down on power
Got a ‘68 MGB that I bought with a 1950 Oselli engine that has been dry stored for a few years. I’m struggling to get it running well. It has been extensively recommissioned with a new stage 2 head, Weber, and 123 distributor. Sent it in to be set up on the rolling road and is way down on power - 65hp at flywheel. Compression is very good. Carb has been rejetted. It was in the rolling road a few years back before it was put into storage and was showing 101hp at flywheel on twin SUs and standard head. We’ve been through most obvious things. Could for some reason the cam be a tooth out (can’t think how or why…). Anyone any other thoughts? No garage locally seems to be up for going through timing!
Asked on 10 November 2022 by John Sartre
Tags: selling a car cam belts classic cars maintenance and servicing cam belt replacement
3 answers
skidpan on 12 November 2022
Plenty of specialists out there for old MG's. Perhaps a call to the MG owners club will help identify a reputable one close to you.
ROGER FURNEAUX on 26 November 2022
It could be any number of things, but if you recently had it back on a rolling road, they should have been able to diagnose anything wrong , especially the ignition. Otherwise, check the fuel feed (pump, any filters).Then go on a specialist forum: mgexp.com is very good, it's based in the USA but has members worldwide, including myself!
skidpan on 1 December 2022
Having noticed the tags which relate to cam belts and after re-reading the original [post I spotted"Could for some reason the cam be a tooth out (can’t think how or why…). Anyone any other thoughts? No garage locally seems to be up for going through timing!"
which further makes me thing the OP might be assuming the car has a cam belt. It doesn't, it has a chain. If that had been fitted a link out (not a tooth on a chain) the engine would not be down on power, it would barely run. Refitting the head on a pushrod engine would not alter the timing so this is just a re herring.
Add a comment
Related questions
I'm in the process of privately buying a 2001 1.7i Ford Puma - one of the last they made. Mileage is 73,000. General chat says the cam belt change (typical Ford) is 100,000 miles or 10 years; the 'experts'...
What is the cam belt change interval on a 2016 Volvo S80 2.0 diesel? My local Volvo dealer is advising to replace the cam belt at 90,000 miles, is this correct?
I'm finding it difficult to definitive answers on cam belt changes on both of my cars. Some sources are saying 10 years/100,000 miles for my 2013 Jaguar XF Sportbrake 3.0D. I also own a 2015 Audi Q3 2.0...
My Volkswagen Tiguan, owned from new, is almost five years old but has only covered 26,500 miles. Volkswagen say the cam belt should be replaced at five years or 100,000 miles but cannot tell me why the...
Compare classic car insurance quotes and buy online. A friendly service offering access to a range of policies and benefits.
Elsewhere on 
