Just went to change the serpentine belt on my Jeep that had snapped. My Jeep has separate pulleys for the water pump and fan. I can't find any reference on the net to a Jeep engine that has the pulley configuration that I have.
My alternator is on the top left of the engine (including belt adjust) my power steering pump is on the top right. The AC is on the bottom right (level with the crank) and then sat in the middle of the block are 2 No pulleys for the water pump and the fan. There are also to guiders near the alternator.
Does anyone have any idea why I can't track config down.
PS. there are no engine ident markings,
Cheers in advance.
Isle of Man Phil
|