vauxhall vectra c - fault code - frogmarch

hi my vectra c on 53 plate diesel 2.0 has the spanner light on when you start up and goes out after a few seconds , i put my autel diagnostic machine on it and comes up with code p 1483 , refer to owners service manual , i hope some one can help me thanks

vauxhall vectra c - fault code - sb10

Try the cooling fan relay,aparently its faulty acording to the book hth

vauxhall vectra c - fault code - Simoncelli58

This is common when one or more 'Glow plugs' are not working.After starting,a few revs put the light out. Cheap enough to fix (4 new glow plugs).

Beware of the old ones being rusted in and snapping during removal. Best to spray with WD40 and leave overnight before attempting !

Good Luck.

vauxhall vectra c - fault code - frogmarch

i have looked at glowplugs and they look like new , butr will take them out and have a proper look thanks

vauxhall vectra c - fault code - frogmarch

hi yousaid try cooling fan relay is it in engine bay fuse box also can you tell me what book you looked at thanks

vauxhall vectra c - fault code - Simoncelli58

Looking at the glow plugs wont tell you anything ! That's a bit like looking at a duff battery, it will look all right - but it wont work ! You can check your glow plugs quite easily - Google a search. They will glow red if they are OK.

This a good trusted one.

vvoc.com

It really is a common problem.

Best of luck.

Maybe you have already been on that site (Octoman)???

Edited by mickyh7 on 17/04/2011 at 22:11

vauxhall vectra c - fault code - sb10

Autodata

vauxhall vectra c - fault code - sb10

It may be on the rad cowling?