Peugeot 106 1.1 petrol 1992 - no spark to plugs

Honest John Back Room » Technical matters
View Threaded
Sat 19 Mar 2011 22:15
Peugeot 106 1.1 petrol 1992 - no spark to plugs - broken pug

i have changed the ignition coil,ignition amplifier ,distributor cap , arm ,cleaned and spaced the plugs but there is no spark car just wont start please let me know if you have any ideas or if this has happend to you and you know what to do

Reply | Report as offensive | Link
Sat 19 Mar 2011 22:51
Peugeot 106 1.1 petrol 1992 - no spark to plugs - elekie&a/c doctor

Check to see if the distributor is turning when cranking the engine.hth

Reply | Report as offensive | Link
Sun 20 Mar 2011 09:42
Peugeot 106 1.1 petrol 1992 - no spark to plugs - Peter D

I suspect the stator sensor in the Dizzy. I do not recall if tit has a hall effect or an induction coil. From the CCT diagram it appears to an inductive device so should show a resistance rather then an open circuit. Regards Peter

Edited by Peter D on 20/03/2011 at 09:43

Reply | Report as offensive | Link