Hi everyone, hope you can help;
A month ago I was driving my Ford Fiesta when I had an EAC FAIL message flash up, the car pretty much lost all power and I had to pull over and restart the ignition which was fine, however this happened twice more on that journey and an engine management light remained on.
As I was worried I immediately got it seen to, the garage I took it to looked at the fault codes and changed a few hoses and it came back with the light off - the very same day it came back on again and I took it back, this time apparently the lambada censor needed changing so this was done. The car has been running ok for two weeks although when stationary it does shudder every now and then (maybe I'm being paranoid) but today the engine light has come back on.
I managed to get the codes to come up on the trip screen after reading about it on another forum, details below (there does seem to be a lot so maybe I've gone wrong somewhere) can anyone provide any advice as to what seems to be the problem and how I would go about rectifying it! Thanks
test
gauge
8888.88
bulb
A0000
nr0810
EE 81
CF 100
CF 200
CF 300
dtc none
E0000
560120
t0000
t60070
F1122
FP1177
FPT177
F60007
007 C
C6002
odo 000
trn --
IUd --
bat 118
bf - 0
hb - 6
SLP - 0
LC0010
CR - 0
AC - 0
P0 - 00
P2 - 19
p6-2d
AD0151
AD1072
AD2255
AD4255
|