06 1.2 Engine fault code PO132 02 sensor high - barnaby
Car running strangely. Engine being hesitant, also seeming to rev when engine running at standstill. Has been into garage twice already, first time yelow warning light reset. Still problem so Pre Cat 02 sensor replaced but still same problem and light came back on again, any ideas what it could be please. Only done about 7000 miles and purchased from Nissan dealer this January. Only three years old at end of September.
Any advice gratefully received thanks
06 1.2 Engine fault code PO132 02 sensor high - injection doc
genuine or aftermarket sensor fitted ? Could be cause by an air leak or air flow sensor fault,needs a little investigation
06 1.2 Engine fault code PO132 02 sensor high - barnaby
genuine nissan sensor fitted. Garage are going to re-fit the old sensor and investigate further. Wondered whether this was a common fault as there is an older post with a similar sound to it.