|
does any body know how to by pass a heater matrix for the time being?
|
|
How about connecting the input pipe to the output pipe. Regards Peter
|
|
ditto
|
i would connect the outflow to the inflow
the other way is so last year dorlings...........
|
|
|
|
A bit of copper pipe slid into the ends of the heater hoses secured with jubilee clips.
Edited by Peter.N. on 24/11/2009 at 20:36
|
|
|
|
|
|
They always go wrong at this time of year. Why can't they fail at the start of summer?
|
Why can't they fail at the start of summer?
Lets be honest on a hot summers day would you rather fix the car or sit in a beer garden?
But yes if a problems going to happen it will when it's minus-3.!
|
A bit of copper pipe slid into the ends of the heater hoses secured with jubilee clips
Seconded. And yes, I know there isn't much room down there and the hoses are pointing the wrong way but come on, it's a C reg Nova ;-)
|
it's a C reg Nova ;-)
>>>>>>>>
>>>>>>>>>>>>>>or it could be a b reg nova too ;-)
|
|
|
|
