Just about due to replace pair of front Michelin Primacy's. I am told that there are pressure sensors incorporated with the valve. What are peoples experiences with tyre fitters and these sensors, called in a kwik fit earlier and they said they left the valve and just replaced the core.
|
Yep that's right. So long as the fitter is sensible they'll be no problems.
If you change the sensor it'll need 'tying' to the BSI.
Steve.
|
|
I've had two sets of tyres on my C5. Pressure sensors are no problem. Fitter just puts in a new valve core.
|
I've had one set of tyres fitted by a local firm with no problems.
The last set I had fitted at a fast-fit type place. When I went to collect the car I was told that one of my valves was faulty and it was a main dealer part only - they replaced the valve with a standard one.
Our local Citroen dealer is very competitive on tyres, so next time they need replacing I will probably go there and get the tyre pressure sensor changed at the same time.
In the meantime, I just kick the offending tyre every now and then to make sure it hasn't gone soft.
|
I was told that one of my valves was faulty
" 'ere look at this funny valve I've just cut off!"
|
|
|