Mazda 323 (1998 - 2003) - 03 2.0 Tow bar electrics

Honest John Back Room » Technical matters
View Threaded
Mon 25 May 2009 11:31
03 2.0 Tow bar electrics - son_t
I've just fitted a Bosal towbar on my 2003 Mazda 323F. I just need to know where I pull the electrics (12N, 7pin) from? Is there a junction box hidden in the car somewhere for the towbar electrics or do I just tap from the feeds to the rear lights?

Any pointers appreciated.
Reply | Report as offensive | Link
Mon 25 May 2009 16:46
03 2.0 Tow bar electrics - doctorchris
I've always just tapped into the appropriate wires in the boot with Scotchlocks, then run the cable through a drilled hole, with a grommet, to the socket attached to the towbar.
The only car that I couldn't do this on was a Volvo 740, where I had to bypass the bulb failure sensor.
Remember that the last time I did a towbar was in the early 90's. However, I seem to remember that the indicator unit needs a live feed from the battery or fusebox that may need to be run the length of the car, under the carpet.
Reply | Report as offensive | Link
Tue 26 May 2009 10:58
03 2.0 Tow bar electrics - son_t
Many thanks for the reply doctorchris. I just needed the confirmation.

I will post my pictures of the towbar install on the 323 with detailed instructions if anyone is interested...
Reply | Report as offensive | Link

Looking for a garage you can trust? Honest John's Good Garage Guide has thousands of reader recommended garages, plus how-to guides and tips on servicing.

The Good Garage Guide