01 2.0 HDI Engine Mounting Fault - Bluesky
I have noticed that the bottom rear engine mounting through bolt cannot be fully tightened because the thread appears to be stripped. I understand that this is a common problem on this model because the capitve nut is manufactured from aluminium.

Does anybody know what thread the bolt is and if it is possible to fit a nut on the thread that protrudes out of the captive nut or of any modification that has been made to resolve this problem?
01 2.0 HDI Engine Mounting Fault - dagenham car center
the nut is 10mmby1.5mm or its a normal 17mm a/f nut.its not ally as far as im aware!