Chrysler Crossfire (2003 - ) - 06 3.2 Spanner light

Honest John Back Room » Technical matters
View Threaded
Fri 17 Apr 2009 13:23
06 3.2 Spanner light - AmandaH
Hi there

Does anyone know how to turn off the spanner light on a crossfire after it's had a service - apart from taking it to Chrysler and paying over £50 ?

Thanks
Reply | Report as offensive | Link
Fri 17 Apr 2009 15:58
06 3.2 Spanner light - SpamCan61 {P}
I think you're asking how to reset the service indicator, in which case see message half way down this thread, may help:-

www.crossfireforum.org/forum/showthread.php?t=7502
Reply | Report as offensive | Link
Fri 17 Apr 2009 22:27
06 3.2 Spanner light - Altea Ego
you could take it to a garage who knows what they are doing.
Reply | Report as offensive | Link
Sat 18 Apr 2009 10:41
06 3.2 Spanner light - MerlinTec
Get in close the doors, Ignition on (run position do not start) press the trip button twice within 4 seconds till the miles till service lights up. Turn the ignition off press and hold the trip again and turn the ignition on and continue told. You should then get a bleep and the display will say 10.000 miles till next service.
Reply | Report as offensive | Link