No previous problems but today I stalled while reversing.
The touch screen audio unit produced some white flashing lines (like an old broken TV) and since then the reversing sensor warning noise stays on continuously.
The audio unit works perfectly so I think that was just a coincidence.
Selecting reverse produces the usual 1 beep which is then followed by a deeper continuous beep and the actual sensors don't work any more.
I found a thread from earlier this year which resulted in the poster removing all sensor connections and re-connecting them which fixed it.
Anyone come across any other fixes?
Edited by Pugugly on 13/12/2008 at 21:52
|
