Sealey trolley jack: changing the seals

Honest John Back Room » Technical matters
View Threaded
Thu 20 Nov 2008 19:42
Sealey trolley jack: changing the seals - duggie
Slightly off topic, has anyone changed seals in a trolley jack? i have a sealey 3 ton jack that needs new seals, i can get the seals from sealey but they give no advice how to do the job.
Cheers. Duggie

Edited by Dynamic Dave on 20/11/2008 at 20:49

Reply | Report as offensive | Link
Thu 20 Nov 2008 22:13
Sealey trolley jack: changing the seals - wayneo
hi mate its fairly straightforward if you just take it apart and remember how you did it there will probably be 1 u seal and a small gland seal there easy to take off just remember which way they are facing
its a case of probably a few bolts and circlips holding a rod in?
hope this helps ya a little bit if ya got any more specific questions i,ll try help
im a hydrulic fitter and i service these from time to time
Reply | Report as offensive | Link