|
hi has anyone a pic or a link to the routing of a 2.5 td fan belt..many thanks james
|
Here is a GIF of that page of the manual, if you want a bunch of PDFs, please email me solomon dot grundy at ntlworld.com
Don't worry about spam as the address has been set up just for this post.
www.flickr.com/photos/13666355@N00/3034933770/size.../
If you want a tip, I used to put the belt on except on the top of the main crank pulley where I would pull it on as much as possible, and then wedge dry screwed up kitchen paper towel between the top of the crank pulley and (4) and bottom of waterpump (5) to hold the belt in place. Then start the engine it used to ride on usually first time - the tensioner will take up the shock, so it won't damage the belt.
Edited by Pugugly on 16/11/2008 at 14:27
|
|
The above with the fan removed.
|
|
,,thanks a million,,that pic is just what i needed,,,,i didnt realise the belt went through the tensioner,,that was what was throwing me,,i had a foot of belt left over,,,, i had assumed the upper bearing on the tensioner pushed down on the belt to tension it,,thanks again,,james,
|
|
|
![2025 Land Rover Range Rover 3.0 D350 HSE LWB 4dr Auto [7 Seat]](https://img.common.prod.group-mobility-trader.com/unsafe/trim/90x60/smart/filters:quality(70):no_upscale():format(webp)/https://cdn.uk.prod.group-mobility-trader.com/images/cas/61cd669ec492d625feb5da3d4a520be0/297cf4df36105cbaa1c52748a38b99aa.jpg)
£107,844was £109,990Details:no_upscale():format(webp)/https://cdn.uk.prod.group-mobility-trader.com/images/cas/e1a428447240476015e358e8e765604b/2c1841155eb0817f03d178cc7e36fb42.jpg)
£91,566was £94,251Details:no_upscale():format(webp)/https://cdn.uk.prod.group-mobility-trader.com/images/cas/d57e111de14442a826206e8508f3e019/41b06bb7e8039f6c8199da023db5a5c5.jpg)
£90,081was £90,357Details:no_upscale():format(webp)/https://cdn.uk.prod.group-mobility-trader.com/images/cas/68bbcf81ab8a3fa63c9b53e48be9fa2f/bf82381296f9b5f8b1d2ee12807f22ef.jpg)
£68,502was £70,028Details