01 1.8 Clock and other function display failure - jaks nana
needing advice i have a problem with the clock , just went off no read out for cd palyer or outdoor temp anyone got any ideas would be greatful cheers

Edited by Pugugly (Moderator) on 13/11/2008 at 21:44

01 1.8 Clock and other function display failiure - Dynamic Dave
The two backlight bulbs have probably blown.

If you click on the following link (from the Vauxhallownersnetwork.co.uk how2 section) it'll open into a word document (or wordpad if you don't have MS Office installed) and this will tell you how to change them.

homepage.ntlworld.com/cavweb/misc/veccyclo.doc

You probably won't have to go as far as removing the speedo assembly to access the clock/stereo display.
01 1.8 Clock and other function display failiure - Simoncelli58
Sorry to Hijack this thread,but - I have one blown bulb in my display-how can I change it without removing the speedo etc. ? Thanks.
01 1.8 Clock and other function display failiure - Dynamic Dave
In short, you can't. It needs to come out to access the bulbs. Just click on the link I posted and follow the info.
01 1.8 Clock and other function display failiure - Simoncelli58
Sorry it was this bit that threw me ! ' You probably won't have to go as far as removing the speedo assembly to access the clock/stereo display'.

Edited by mickyh7 on 10/11/2008 at 12:15

01 1.8 Clock and other function display failiure - Dynamic Dave
From what I remember, you have to remove the trim that covers both the stereo display and speedo pod, but you can leave the speedo pod in situ while you attend to the stereo display.
01 1.8 Clock and other function display failiure - Simoncelli58
OK - Thanks Dave
01 1.8 clock and radio display - jaks nana
got a problem clock not working tried fuse and changed both back lights as they had blown still no joy any idea anyone thanks

Edited by Pugugly (Moderator) on 13/11/2008 at 21:44