Happy lunchtime to you all,
The hazard lights on my 9000 don't work. The indicators work fine so I'm assuming that it's the switch unless those wacky Swedes have a seperate relay for the hazards. Does anybody have any experience of this? Is replacing the switch an easy job? It looks very tight in the dash. My track record on 'simple' jobs is not great...
Cheers in advance.
|
I also had this problem with mine, basically you have to remove the glovebox 4 or 6 screws on the outer casing, (Do not remove the 4 screws on the inner glovebox as these are for the brackets), you'll have to take the clips from the air pipe off, these are just clipped on followed by removing the glovebox internal light wires off, behind that there are 2 screws which house the fuses, when you remove these the panel comes down and you'll see all the relays.
The relay you want to replace from what i can remember is the one on the back right hand side, it does say on it flasher relay, if you've got the same as me then the description is: Part Number: 41 11 522 - Relay, Flasher 2x2
I would recommend buying the new relay from: m5saabcentre@aol.com or contact them on: 07910931357.
They charged me £5.00 and £1.95 P&P for the relay which if you look around that is the cheapest around as i got quoted £55.00 from various parts shops.
The hardest part about putting it all back is making sure you house the air pipe on the left hand side, you'll see what i mean when you do it.
Hope this helps?
All the best for now.
Note: Do not take the hazard switch out as it tends to break like mine, if you do break it then the above people can supply you with a new one.
|
|
|
