i have a peugeot 306 which was in an accident at the weekend and it had some front end damage which caused the car to cut off power. I have taken it to a local garage and they say they need the immobiliser code for it but while i have had the car i havnt used one as it has been disconnected due to problems before. The car is now turning over but just not firing up. Any ideas as to how i can get this sorted cheaply!
|
Checking to see if there's an inertia switch would be a good start.
|
yeah the switch is down and have pressed it several times but wont work.
|
|
I am told only other thing that stops the engine is the Fuel STop Solnoid, check you have 12 volts there when cranking.
|
|
|