My brakes have got worse now to the state of squeaking when ever the brakes are applied, what causes this?? How do i stop the noise??
Any help would be great
Chris
|
What car? Discs or drums?
If drums, the classic cause is dust. Remove the drums and give them a good blow out.
Terry
|
Its the disks on a pug 205, the drums are fine
|
|
|
If pads & discs are not worn out, they will require de-glazing. Removal of asbestos by manufacturers of friction material means that if you brake moderately,pads glaze up & squeal.Drivers that are heavy on brakes do not usually suffer this problem.It is almost impossible to completely eradicate this problem even with regular de-glazing and use of copper grease on backings & pins.
|
Are the brakes missing antivibration springs? I had to replace mine on my van as they were rusted away. Could a little shamfering off leading edge help?
|
|
|