Fiesta Endura 1.3 1997 stalls on slowing down approaching junction etc, engine cuts out. It's been doing this for about 3 years so I clean the idle control valve and problem resolved for about 5000 miles then returns, clean valve and problem goes away HOWEVER cleaning failed to fix so I replaced Idle control valve and problem seemed resolved however 1 week later problem returned, engine running slighty eratic at low revs but not always also stalling problem not always. I am now suspecting Throttle Position Sensor but cannot find it can anyone give me a detalied description of where it is situated or even better send me a pic. Also if anyone has any other ideas what the stalling problem could be please help.
(what part of put the year & engine details in the subject header did you find so hard to understand?)
Edited by Webmaster on 22/02/2008 at 17:05
|
_COLON_no_upscale()/cdn.uk.prod.group-mobility-trader.com/images/cas/20303be904d854935f7f115559a96a2a/39682258f8fc2c176487e1422732aec1.jpg)
![2021 Ford Fiesta 1.0 EcoBoost 125 Titanium X 5dr Auto [7 Speed]](http://images.honestjohn.co.uk/imagecache/url/crop/90x60/https/assets.heycar.co.uk/t_default-export/f_auto/application_assets/vehicles/pictures/35f83b6cb6c800feb0bc9002d6d690e2/31471fb90d5fc8b81424a6f2a87de08d.jpg)
