The vehicle in question is an Leyland Daf 200 model 280cc with a luton body and single wheels at the back.
The vin plate is confusing and has several weights that seem to relate to differing dimensions / axle weights etc
Thanks in advance.
David.
|
|
The plate should have a GVW on it, you may need to go to a weigh bridge and have it weighed empty, then the difference between this an the GVW is the maximum load. Just be careful as it is easy to overload a Luton on a single rear axle!!! I would guess max load will be between 1.5-1.75t but may well be lower depending on weight of body!
|
|
|
David,
Some Googling found the below link, you would probably get the answer there....
www.ldv.com/gb/aboutask.asp
some further posts hidden after the original edit by one of the Mods
|
|
|