The exhaust valve tappet clearances are within spec. However the Inlet valve clearances are 0.14/15mm which are on rhe borders of minimum (spec 0.15/25mm) Do these clearance increase or decrease with wear. Also does anyone know where I can obtain Toyota special tools 09248-55020 (for extracting shims) which apparently Toyota dealers will not supply
|
:no_upscale():format(webp)/https://cdn.uk.prod.group-mobility-trader.com/images/cas/912a3969f3737be9c666ea41bac70ebe/5af6c4d8ae8233a65f28ccb6a133cf1c.jpg)
:no_upscale():format(webp)/https://cdn.uk.prod.group-mobility-trader.com/images/cas/247e44c77706f77fb49e1bd6c453617c/8154c251d0fe3ebd139c14d007dc2377.jpg)
:no_upscale():format(webp)/https://cdn.uk.prod.group-mobility-trader.com/images/cas/5de8de625cdbbaf4c76a9b22040d5763/aedc9af0e089fd63abc0e636fcce0c17.jpg)
:no_upscale():format(webp)/https://cdn.uk.prod.group-mobility-trader.com/images/cas/bb0ffb9a9e7854fe9147b26bec068567/62ca3319e5d5e54af1e66c56a26d5a4f.jpg)
