Be nice if we knew what the emission figures were;it could be a total failure of the system-not just a marginal one.
|
what are the readings ie co and lambda ? has it failed at idle or fast idle ?
|
I had one that failed emissions. (petrol 1100 I think it was). At the back of the rear silencer, on the can , there is a small hole about big enough for a pencil to go through. This rusts out a bit and will cause emission fail. Plug the hole with some exhaust putty for MOT. Also a good idea to go along length of exhaust and band it with a hammer to loosen of all the crap in the pipes and silencers. After that take it for a good HARD run to blow all the crap out. Mines passed after that. Remember to remove putty after it passes. Mechanic friend told me this and it does work.
|
|