|
Can anyone help me.... i can't remove the heater fan /motor from my 1998 Audi A4 1.8 se..i can get to it (it's behind the glovebox) but when i undo all the screws it comes loose but will not come out .....Help
|
|
By any chance does it turn a bit and then drop out?
|
|
It does turn and come loose a bit but it still wont come out
|
I recently changed the motor on my wife's 2000 reg Tdi and I assume they are the same.
You may have to remove the curved bracket above the motor - 3 bolts, one at the front and one at the back.
You don't need to remove the whole housing - just undo the four screws holding motor to housing and break the sealant bond (its only silicone selant) and it should come out with a little juggling.
PM me if you need advice on a replacement motor.
I had taken mine apart a couple of times to try and repair so when I changed the motor, because I knew what i was doung it took me 40 mins - start to finish
Let us know how you get on.
|
|
|
