Peugeot partner van

Honest John Back Room » Technical matters
View Threaded
Fri 29 Sep 2006 14:38
Peugeot partner van - trickynicky
Can anyone tell me at what mileage the cambelt is due for replacement, and what else should be done at the same time on the 2.0 HDi engine please
Reply | Report as offensive | Link
Sat 30 Sep 2006 02:37
Peugeot partner van - PaulFromMelton

According to Autodata....

96,000 miles under normal conditions
80,000 miles under adverse conditions

It doesn't say what need changeing at the same time. There seems to be a tensioner, a waterpump and something marked as 'G' which I assume is a guide.

Interestingly, it states that the injection pump doesn't need timing so it's a fairly easy job as long as the cam and crank are pinned in position.
Reply | Report as offensive | Link
Sat 30 Sep 2006 10:15
Peugeot partner van - 659FBE
Change the crankshaft auxiliary belt drive pulley at the same time. The rubber inside, which constitutes the torsional vibration damper in conjunction with the driven masses, breaks up.

Make sure you understand the method of setting the vernier adjustment to the cam wheel, ensuring that you tension the belt without any locked in torque. As has been said, the pump is not timed. Renew the water pump at this mileage.

659.
Reply | Report as offensive | Link
Mon 2 Oct 2006 10:22
Peugeot partner van - trickynicky
Thanks for the advice 659
Reply | Report as offensive | Link
Mon 2 Oct 2006 10:21
Peugeot partner van - trickynicky
Thanks PFM
Reply | Report as offensive | Link

Looking for a garage you can trust? Honest John's Good Garage Guide has thousands of reader recommended garages, plus how-to guides and tips on servicing.

The Good Garage Guide