306 Door panel.

Honest John Back Room » Technical matters
View Threaded
Tue 6 Jun 2006 13:19
306 Door panel. - jim-mapps
Hi

I've got a p reg pug 306 xsi and the window's stuck in the door but I can't get the door panel off to have a look, stuck on the last bit, there's just the door handle left holding it on. Used to have a d-turbo and with that one i just had to slide it to one side and the handle popped off but I can't get this one off, anyone know how?
Reply | Report as offensive | Link
Tue 6 Jun 2006 16:11
306 Door panel. - Andrew-T
Haynes manual confirms that the handle (I suppose you mean the part surrounding the latch release) is the same as on the 205 - you just lever it off the panel. It's held on by 3 or 4 stalks which click into place.
Reply | Report as offensive | Link
Tue 6 Jun 2006 17:00
306 Door panel. - jim-mapps
It does, cheers... didn't wanna break it that's all.

Doesn't help me with the window though. Thought it was gunner be a simple case of putting that little clip back on but the cables are all tangled inside the motor... Bizarre.
Reply | Report as offensive | Link