heater only works when turned on full no4.does not work on 1 2 3 as anybody else had this problem can it be repaired help
|
|
Whilst I have no direct experience of the Vectra C I would imagine the fan speed steps are set by a resistor pack, which has failed, leaving only zero ohms = full speed. Sorry I'm not sure where this is located on your model, hopefully somone with a Vectra C will be along shortly....
|
Less than 3 yrs old? If so, then let the warranty take care of it.
If not, the resistor pack used to be situated right by the blower motor on earlier Vauxhalls, but no idea if that's where it's situated on the Veccy-C.
|
|
|
