vectra crank sensor | Technical matters | Back Room Forum

Fri 6 Jan 2006 13:49

vectra crank sensor - marty

hi all the engine management light came on the other day on the motorway and car went into limp home mode but when i turned off the ignition and the restarted it the light went out have just checked the code (0335) and it says crank sensor
where is it and what do i need to do about it
the car drives ok now

Reply | Report as offensive | Link

Fri 6 Jan 2006 19:49

vectra crank sensor - Dynamic Dave

where is it

This might help:-
www.topbuzz.co.uk/info/crankshaft_sensor/crankshaf...m

and what do i need to do about it

If everything's now ok, then nothing. However, it sounds to me like an intermittant fault that *could* reoccur when you least expect it. Sometimes it can be traced to a poor connection between the plug and socket joint. Separate them and spray some switch cleaner on the contacts and reconnect again.

Reply | Report as offensive | Link

Related questions

Transferring a number plate from a write-off

Who owns a private number plate after insurance company has deemed the vehicle a write-off in an accident?

How do you test an AWD system is correctly working?

How do I test an AWD system on a test drive?

Do I have to use beam deflectors on my Audi A4?

I have an Audi A4 Avant (2012) that I drive regularly to France and use the beam deflectors. But I was wondering, is it possible to adjust the lights on the car so I don't have to use the deflectors?

Driving aboard - do I need to carry a spare bulb kit?

There seems to be confusing feedback about the need to carry a spare bulb kit when driving in Spain. I have a 2014 Honda CR-V and there appears to be no bulb kit for this vehicle on the market. Does that...

Ask Honest John

Sell Your Car

Real MPG

Fuel Calculator