|
HELP-MY rover starts ok, but when i slow down or change gear it stalls, im not a mechanic so i need help in layman terms
|
|
ive put new air filter in, bled fuel line, done the brake peddle, and still she stalls,it is only stalling on short journys steve
|
|
Check the intercooler hose isn't split. Sometimes these can weaken and collapse under pressure even though you can't actually see it when the car is stationary.
|
Another thing to check is the boost pressure sensor which is situated on the bulkhead. There is a tube running to it from the turbo. For some reason the connector is upside down and can collect moisture leading to a deterioration of the connection. I've seen this on a few 200's and 400's fitted with the L Series engine. The connectors may well be a green colour due to the corrosion.
Apart from that, I can think of nothing else, so off to specialist with some diagnostics I'm afraid.
|
|
thax Xileno will look at the parts today, and let you know
|
|
|
|
found out it was the sensor on the intercooler, plus a loose connector from the wires that run across the top of the head gasket. gave them all a clean put them back and it runs like a dream. so a big thank-you to all
|
|
|
|
