|
Living up to my name, I managed to smash the passenger side rear light unit on my rover 414....bulb etc intact...does anyone know if I can replace just the plastic cover ( whatever it is called?) & if so how, plus if not, would I as a reasonably practical person, be able to replace the whole unit myself?
|
|
dont know if the cover itself can be replaced as they are generally sold as the whole unit, worth having a look though. in regards to changing it yourself it should be just bolted on but the bolts may be a bit stubborn as they might not have been touched since the car was made. if it turns out that you have to get a whole unit be sure to keep the rubber seal between the light and the car body as the new light cluster may not come with one.
|
|
|
that I recall these are one unit.Held on by I think 4x 8mm nuts,when replacing unit use silicon sealant on both sides of gasket used or not.as they do and will leak if you dont,you should be able to do yourself they are not hard to do
--
Steve
|
|
|
