The Haynes manual states that their is a drain plug for the cooling system on the cylinder block, where is it located?
|
I'm away from the 106 manual at present so am unable to look myself, but knowing the way modern Haynes manuals are set out (rather poorly and printed on newspaper) then there's likely a picture in another section, such as 'coolant system' or 'engine' rather than in the servicing guides they like to put in the front/back.
Failing that, Just disconnect the bottom hose on the radiator. It'll drain a lot quicker then :-). Oh and don't forget to follow the bleeding procedure afterwards, as I think there is one, and there's too many horror stories on here not to.
--------------
Mike Farrow
|
|
|
