Hi,
Dose anyone know of a away to fit and make the indicators flash when you lock a MK2 Rover 400? like the newer Rover's (and most cars do). It has the normal Rover remote locking and alarm etc. I guess it needs 'just' a relay to flash the lights. But what to get or ware to fit? Many thanks.
James.
|
If it's anything like Fords, the flashing is all to do with the ECU. For example - I have a pre facelift Focus which has the CSM (or something like that) Module. The facelift Focus has the GEM module and you can set that to flash on unlock too which you can't do on mine.
It may be possible to use a relay though. Someone else will know.
--
Adam
|
|
if its not flashing twice when locked it usually means its not arming the alarm. check to see if all the doors/boot/bonnet are registering as closed
|
|
|
|
I dont think you can on that car..Alarm warning led is on dashboard.Why do you want flashing indicators?
--
Steve
|
to remind the owner (not me!) it's locked or unlocked by a visual clue.
James.
|
Visual clue is locking buttons.on top of door trim.when they go down ie level with door trim.It is alarmed/immobilised/led starts flashing..using remote..All disarmed is buttons up.Led stays flashing untill ignition is switched on..Just in case check warning Led on dash.After 30 seconds it flashes slowly once locked
--
Steve
|
|
|
|
