|
MOT advised slight play in offside wishbone. What would this involve to fix, and is it straightforward to DIY?
|
|
Hi, is this a mk 1 Laguna? if so I have never had the bushes go on a Laguna wishbone. so it must be the ball joint has play. I would advise you to fit the ball joint rather than the full wishbone, as the bolts mounting the wishbone have captive nuts which come away from their welds and its not a nice job. If you swing the hub to one side and get a axel stand and support the wishbone next to the ball joint so as to give you something to knock against, the ball joint will come away from wishbone, its only fixed in with splines. You might just need some heat around the joint. Good luck.
|
|
|