|
We have a leakage! Have replaced the thermostat today but water is still leaking from the back of the power steering pump, through holes that were already there.....any ideas pls?
|
Are you talking of blanking plate inserted into block..compression fit..If so they do corrode meaning fitting a new one. not certain on 820 so may be wrong??. Do the holes have a thread?.
--
Steve
|
|
The leak is on the back of the power steering pump. I took off the housing and there was a small impellor. The hose from this part goes to the bottom of the rad. The holes do have thread, I plugged two with bolts but the leak has re appeared!
|
|
|
