Peugeot 106 (1991 - 2002) - 1996 - Immobiliser Keypad Problem

Honest John Back Room » Technical matters
View Threaded
Wed 12 May 2004 17:14
1996 - Immobiliser Keypad Problem - rvinno
Hi,

I got up this morning with an extremely fuzzy head, couldn't think straight at all. I go into my P Reg Peugeot 106 (with the annoying immobiliser keypad), turned the electrics on and proceded to enter the wrong code 3 times in a row and it's locked me out.

Is there any way of resetting the keypad so I can enter the right code?

Cheers.

{made use of drop down menus}

Edited by Dynamic Dave on 22/01/2009 at 19:20

Reply | Report as offensive | Link
Wed 12 May 2004 19:04
Pug 106 Immobiliser Keypad Problem - LeePower
Hi

All you need to do is leave the ignition switched on for 30 minutes, wait for it to stop beeping.

Then enter the CORRECT code in the keypad.
Reply | Report as offensive | Link
Thu 22 Jan 2009 13:56
Pug 106 Immobiliser Keypad Problem - lsj
Hi - I have just registered on the site as I have a problem with my Peugot 106 keypad immobiliser. One of the numbers I use in my code is wearing out and is getting harder to use. I'm guessing I can change my code number but I bought it second hand and I don't have any instructions. The pad has the following buttons

1 2 3 C
4 5 6 S
7 8 9 0

I'd be grateful for any suggestions before I immobilise my car for good by mistake!
Reply | Report as offensive | Link
Thu 22 Jan 2009 18:47
Pug 106 Immobiliser Keypad Problem - Dynamic Dave
One quick google:

Turn on ignition (dont start engine)
Enter current code (red light goes green)
Press C button once
Enter in new 4 digit code
Press C button again once
New code is now entered and confirmed by 4 beeps
Start engine

(Found at
www.ilexa.co.uk/forum/index.php?board=11;action=di...0)


Edited by Dynamic Dave on 22/01/2009 at 18:48

Reply | Report as offensive | Link
Thu 22 Jan 2009 19:13
Pug 106 Immobiliser Keypad Problem - Dynamic Dave
Found a bit more info,

Original code retained in memory for 3 turns on of the ignition switch, if new code forgotten re-enter the old one.
After 3 ignition switch operations original code lost and no way back!!
From (uk.answers.yahoo.com/question/index?qid=20070829075918AAgBPmi)

Or you can do away with the keypad altogether:-

www.honestjohn.co.uk/forum/post/index.htm?v=e&t=54...9

Hope this helps?
Reply | Report as offensive | Link
Thu 22 Jan 2009 21:00
Pug 106 Immobiliser Keypad Problem - lsj
You're a star and truly dynamic Dave! I had visions of me getting stranded in the middle of nowhere on one of my birdwatching trips. I feel safe again now.

Thanks very much for your help
Reply | Report as offensive | Link