BMW Park Distance Control - Not working. - Phoenicks
My gf's BMW Compact 1.6 1996 has Park Distance Control which has just stopped working. Anyone got any ideas?
BMW Park Distance Control - Not working. - CM
Not wanting to point out the obvious but have you washed them. Mine packed up for a while (gave a continuous beep) and they also looked clean. Perhaps you could get your gf to give them a gentle rub.
BMW Park Distance Control - Not working. - Phoenicks
Doh!

Actually. I'll check later but would all 4 stop working even tho only 2 might be dirty?
BMW Park Distance Control - Not working. - CM
My previous post might be totally wrong if no noise is emitting. I can only go by what happened with mine. Sometimes it made a continuous noise, sometimes a noise like a strangled cat and sometimes no noise at all.

I think that this was down to only one having a covering of dirt on it.
BMW Park Distance Control - Not working. - Phoenicks
Theres no noise from the PDC,
BMW Park Distance Control - Not working. - Burnout2
The PDC on our 328 failed several times over the warranty period. The high pressure spray from a jetwash can damage the sensors, and should be kept well away.
BMW Park Distance Control - Not working. - Leon on Derv
Could that possibly be because despite having PDC fitted she still managed to back into something and banjax the sensors!?!?!?

Leon
BMW Park Distance Control - Not working. - Phoenicks
Nah, shes quite a good driver!

No physical damage i can see.

Burnout - what was the cost to the garage of the warranty work?
BMW Park Distance Control - Not working. - NARU
From another forum - fair chance yours will have the same connections, which might be worth checking before you get a dealer to read the fault code. My understanding is that a faulty, dirty or missing sensor will activate the continuous tone....

I've recently been playing with the PDC kit from a 98 E36. The unit has two looms, one for the sensors, one for connecting to the rest of the car.

The 2nd loom had seven connections which were:

12v (switched igntion)
1 x Connection from reversing light
2 x 0v
2 x Data connections (for the diagnostic plug in)
1 x Output to under dash chime unit