Loose Pug 306 driver's seat - SjB {P}
The driver's seat on SWMBO's 306 Sedan has worked loose, and armed with Haynes manual, I intend to fix it myself.

Before I do however, is this a known fault with a known cure, please, such as tightening a bolt, or perhaps replacing a pawl that I could order from local motor factor or Pug dealer beforehand?

As far as I can see without dismantling, the entire seat assembly is free to move backwards and forwards about half an inch on the runners, which are firmly bolted to the floor.


Many thanks.

 

Value my car