peugeot206cc - fan

Honest John Back Room » Technical matters
View Threaded
Sat 17 May 2014 19:41
peugeot206cc - fan - lee84

I have changed the relay in front next to the fan and now the fan stays on all the time

anyone have any ideas .

Reply | Report as offensive | Link
Mon 19 May 2014 14:51
peugeot206cc - fan - Gibbo_Wirral

Have you tried a BSI reset?

www.bba-reman.com/content.aspx?content=peugeot_bsi...s

Why did you need to replace the relay?

Reply | Report as offensive | Link
Mon 19 May 2014 17:13
peugeot206cc - fan - lee84

I had to change the relay because the whole connection block was corrided

Were is the bsi reset and what is it ?

Reply | Report as offensive | Link
Mon 19 May 2014 17:20
peugeot206cc - fan - lee84

I have just read the page

I will try that and let you know

Reply | Report as offensive | Link
Mon 19 May 2014 17:39
peugeot206cc - fan - elekie&a/c doctor

Are you sure the wire pins are in the correct order and is the relay the correct type.?Not sure how a bsi reset is going to affect a corroded connector block?

Edited by elekie&a/c doctor on 19/05/2014 at 17:42

Reply | Report as offensive | Link
Mon 19 May 2014 19:14
peugeot206cc - fan - lee84

I got the relay and holder from peugeot garage and wired it in the same way

On the front left hand side there is a plug that connects to what looks like a resistor of some sort but not sure .could this what ever it is be the problem

Reply | Report as offensive | Link
Mon 19 May 2014 21:22
peugeot206cc - fan - elekie&a/c doctor

The resistor is for the slow speed operation of the fan.Can't see this being the problem.

Reply | Report as offensive | Link