Alloy Wheels - Bad Design! | Technical matters | Back Room Forum

Fri 27 Sep 2002 09:42

Alloy Wheels - Bad Design! - Andy P

A year ago, I purchased a set of BK Racing alloy wheels. Unlike normal wheels, the bolts required a key, like a large allen key, to remove them. This way, they fitted snugly into the holes without leaving a gap. However, I now realise that this leads to a problem - the bolts have begun to show small cracks around the upper edge.

BK Racing claim that that this is due to overtourqing the bolts, yet the wheels have only been removed probably four or five times, and the bolts have always been put back on using a torque wrench. To me, it seems like a bad design - the wheel nuts are simply not thick enough.

BK Racing won't replace them, so be warned - BK Racing wheels may look good, but their bolt design leaves a lot to be desired.

Andy

Reply | Report as offensive | Link

Related questions

Which cars use a torque converter automatic gearbox?

Can you tell me which cars use a torque converter?

What is the most reliable small automatic used car?

I am looking to buy a small automatic used car (petrol). Budget of up to £9000 but ideally looking at something in the £5000 to £6000 range. Will be using it mainly for short city journeys and the odd...

I need a small reliable automatic with a torque converter gearbox, what are my options?

My wife's Honda Jazz 2012 model needs a new or secondhand gearbox, so I am looking to see what automatic we can buy for around £6500 that will be reliable and a torque convertor auto gearbox What would...

Which cars have a torque converter automatic transmission?

Which automatic new cars in the UK still have torque converter gearboxes as many manufacturers seem to be switching to cvt or twin clutch?.

Ask Honest John

Sell Your Car

Real MPG

Fuel Calculator