Stick-on protective mouldings

Honest John Back Room » Technical matters
View Threaded
Wed 28 Aug 2002 22:16
Stick-on protective mouldings - malcolm
How do you remove the mouldings that are attached using double sided adhesive tape?.
As my main Honda dealer has made such a mess of fitting the corner mouldings to my Jazz I have decided to fit the replacements myself.I have already fitted the side mouldings.
This has been ongoing for the past 6 months during which time they spent trying to produce an acceptable finish to the corners "orange peel, cracking,runs and even the wrong shade!.
Any tips please.
Regards Malcolm.
P.S. Great car exept for the suspension being too firm for Country roads where I live!.
Reply | Report as offensive | Link
Wed 28 Aug 2002 23:32
Stick-on protective mouldings - svpworld
Try using a hair drier to first warm and soften the adhesive, then a little petrol to clean off the debris.

Simon


_____________________________________
SVPworld (incorporating PSRworld)
www.svpworld.com
Reply | Report as offensive | Link