Hi,
I have just recently purchased a Rover 400 (1600 petrol).
When I apply the brakes they function correctly. However, when I release the brake pedal and re-apply immediately (at slow speeds), the ABS seems to become active i.e. I get a juddering from the brake pedal. It does not seem to do this when I first appy the brakes, but only only the second attempt.
The ABS light on the dash is not illuminated.
Any suggestions to resolve this annoying little problem.
King Regards.
Anthony
Edited by Dynamic Dave on 29/04/2008 at 21:59
|