Citroen AX immobiliser | Technical matters | Back Room Forum

Sat 11 May 2002 21:45

Citroen AX immobiliser - nr

I have a 1996 AX with a dealer fit immobiliser.The sensor ring that goes around the ign-barrel (picks up a signal from the key fob) has a break in the very thin co-axel wire leading to it.I have tried to repair but it is not reliable. Main Dealers can`t help and the name on the module is Texalarm TKF 165 GB.
I`am not looking forward to removing it so any advice on repair or supplier would be greatly appreciated.

Reply | Report as offensive | Link

Sun 12 May 2002 21:38

Citroen AX immobiliser - David Lacey

I reckon you'll end up removing it

More hassle than it's worth....replace it with a Clifford Virtual Key immobiliser
MG-Rover Questions? Click on www.mg-rover.org

Reply | Report as offensive | Link

Related questions

Does the 2007 Mazda 3 1.6 petrol use a timing chain or cam belt?

Does a 1.6 petrol 2007 Mazda 3 have a timing chain or cam belt?

Does the Fiat 500 Twin Air use a belt or chain?

I have a 2015 Fiat 500 Twin Air which has done 33,000 miles. Should I be considering having the cam belt changed?

Why are there no chaim cam spares for my 2011 Skoda Fabia Elegance 1.2?

I'm buying a 2011 Skoda Fabia Elegance 1.2 TSI from a Skoda dealer. The vehicle requires a new cam belt but there are no spares available in the UK. Does this bode ill for the availability of future spares?

My timing belt has gone - what rights do I have?

What rights do I have in terms of my BMW 1 Series which I have had from new and is three months out of warranty as my timing belt has potentially gone?

Ask Honest John

Sell Your Car

Real MPG

Fuel Calculator