entering code on rover r770 stereo

Honest John Back Room » Technical matters
View Threaded
Thu 28 Dec 2006 14:07
entering code on rover r770 stereo - kindrik
Hi

I've recently purchased a rover 25 and it's been fine (except for the exhaust going but that can happen to anyone!) I'm having problems entering the code for the stereo atm though. The manual says that when the word code appears in the display you should press the radio station preset number 1 button. The problem is that code only appears briefly and when I hit the preset button it only seems to change the radio station instead of letting me input the code! I was ok with this for a while but now the radio spends more time off than on and it's starting to grate on my nerves a little! I'm currently getting lights on the stereo for a few seconds then a bleep followed by the stereo turning itself off.

Does anyone know an easy way to enter the code (which I have in the manual) or anything else that may help me out! Thanks in advance for any help you can give!
Reply | Report as offensive | Link
Thu 28 Dec 2006 14:09
entering code on rover r770 stereo - Dynamic Dave
Code information here (bottom of page, on the RHS):-

tinyurl.com/y2js3f
Reply | Report as offensive | Link

Looking for a garage you can trust? Honest John's Good Garage Guide has thousands of reader recommended garages, plus how-to guides and tips on servicing.

The Good Garage Guide