306 D Turbo Rev counter.

Honest John Back Room » Technical matters
View Threaded
Tue 31 Jan 2006 14:54
306 D Turbo Rev counter. - Dan's 306
My rev counter keeps cutting out. I have changed the instrument cluster and this seemed to solve the problem for a while but it has started again.

Any Ideas? where should I look?

Many Thanks
Danny
Reply | Report as offensive | Link
Wed 1 Feb 2006 22:23
306 D Turbo Rev counter. - autumnboy
Check your wiring from the sensor at the flywheel housing at the rear of the engine near the exhaust manifold area. You need get under the car to see it. It could be a bad connection or broken wire along the way. Or it could be a faulty sensor.
Reply | Report as offensive | Link
Wed 1 Feb 2006 22:55
306 D Turbo Rev counter. - bell boy
i wouldnt worry about it dan concentrate on the driving and you will get to know the revs by the sound of the engine after a while and you will rarely need to look at the rev counter again,especially if you are on the mainland with our crowded roads
--
\"a little man in a big world/\"
Reply | Report as offensive | Link