Off the top of their heads does anybody know how much oil is required to fill the pug above?
I had a quick google but can't find the actual number :(
TIA
JaB
|
The Haynes Manual for the 306 1994-1999 states that the oil capacity for the 1.4 engine is 3.2 litres (including the filter).
Hope that helps
Martin
|
Just to confuse the issue, my Haynes data book says a 1.4 Pug 306 takes 3½ litres of oil.
If I were you though, I would put in 3.2 litres as the above post suggests, and then check the oil level. Far easier to add a bit more later than to try and take it out afterwards if you've overfilled it.
|
|