96N Rover 414 - 10 days ago had clutch master cylinder renewed by a rover dealer - too cold to do it myself. Eversince the cars not been the same. Idles erratically from 900 - 1500 rpm, intermittent jerky accelaration/decelleration. Any ideas what could be the cause? Could they have inadvertanly knocked something whilst carrying out the job? I can imagine what the garage are going to say - two words and one of them is 'off!'
|
If as you say problem only occured after job done.Take it back.If it was to do with them.Its their prob not yours.I doubt whether they will say anything of the sort.Just dont dive in annoyed.You may be surprised at response.ie just explain the problem.see what they say..Let us know though
--
Steve
|
|
|
Changing a clutch master cyl will have no effect on the running of the engine,but it is possible that a breather or vacuum pipe may have inadvertantly been dislodged.Check top of engine between inlet manifold & bulkhead for any loose/split pipes.
|
|
|
